Image : http://www.flickr.com
The finished garment is to be a step forward only the cut and sewn fabric. The following tips will make the process easier. The process is divided into three phases, namely pre-production, production and post production.
Preproduction
A. Planning
If I ever go to buy a house without a shopping list, you must remember certain elements or are not sure the products over interested in buying, and the same happens when you kick out of sewingGarment. It was noted that a tailor, considering the above and the design of a dress, with splashes of color and intelligent thought and a list of ideas that he wishes it would take less time and money to manufacture the clothes, as if he just the fate of banks.
A manufacturer should be with sketchbooks and doodles with the thought of clothing, beautiful drawings and pieces of fabric. Above all, set the pages with a sketch of a garment, lists of things likeHooks and eyes or approximate length of thread embroidery trim, and buttons, and other accessories. If you have some tissues in our house which is like a dress from the production, you should add a piece in the notebook line drawing, you can choose to compare liner or separate.
The surprising thing is that you do not need any artistic ability to apply this technique. Only a sketch, add color and create your own list, then your actionPlan is ready to be followed. You can get someone who has a good knowledge of design, a primary form to describe the types of garments for production. Photocopied them and applies them to draw and paint. In any case, we will be ready when it hits the fabric stable and run a sale. With a sketch book nearby, you can compare the color of the towels and $ 1.99 for a swatch of cloth in your book and buy it or leave it.
Another typemakes this method for you to have pictures of different types of garments and clothing you do, and attach it in your sketchbook with tissue samples, photocopy.
B. Choice of material
Clothing in 16th and 17th centuries, had produced a specific weight that have created the type of fabrics are both on hand and used. The sources said it was a particular piece of clothing made from silk covered with Taft, speaking of a very seriousBody in silk with a silk taffeta lining clean. We carry only this type of silk, which are much softer and thinner than would have been used.
This problem can be overcome in two ways. First, the transition to combat more serious, but less expensive materials, which is expected to achieve to reproduce. Secondly, if a heavier weight material is not available, or if you want to work with the thinnest material, you can slug the garment.
Interlining: Cut the lining interlining with the outsideCoating. Put them together and treat them as a single coating of the fabric during the development phase. Baste or pin together as required.
C. Pre-wash
Everything should have a pre-wash, no exceptions. Even if it says "dry clean only." Burn In a first test to ensure there are no miracles, to pre-wash and wash everything, is what creates the natural fiber with silk and linen. The dryer is the most important thing that helps Damager and tears the fabric. Therefore, drymaterial according to the pre-wash, but the finished garment can be dried by drop until it is thrown in the trash, referring to the fabric used. Before pre-washing, take a small tissue sample and compare them with the material after it has been previously cleaned and dried. As a general principle, jacquard brocade upholstery and clothing should be established at the drop dried. If the garment is manufactured from high-class cotton, linen or silk, it is washed and normal, until and unless the pre-wash bucketsswatch indicated a severe loss of color, reduction or other adverse effects. Then just dry.
We can not pre-overload washing. During the production phase the material dimensions are very modern '. The term "downsizing" is mentioned, the soaking that most of the material offers greater depth and luster after pressing rollers and then reclining on boards for the transfer to stall. After the fabric is washed, the "size" is washed out and the fabricbecomes softer and less glossy.
Shrinkage can be avoided, pre-wash. Most modern fabrics are expanded (or very little, is based on the quality), while weaving and sizing procedures. If the fabric is not washed before cutting and to make plans, you mind if you delete the project and is very small so unwanted.
The perfect way to decide if the fabric is made of natural fibers, is to test a burn. If you are a business and notsure of a fabric material, you should ask for a cut, burn and take tests on parking.
D. Ironing
Since it is not easy to trace the crumpled paper, it is extremely difficult to cut a dress on a crumpled piece of cloth. You should remove the cloth before cutting.
E. Pose tissue
If you cut and doubled on the aquifer, it is really important, line-up of the fabric before cutting. If the fabric is not lined up before cutting, double andon ground, the grain could be a few lines for the different parties to be finished, and this will create a bad impact on the finished object.
F. Pattern Cutting
The lines of wheat can not be taken for granted! They should cut all parts of the head (if the shell, lining and interlining) are used simultaneously. Avoid using pins instead weights model. Therefore, the model will prevent perforation, and makes the process more efficient. Most expensiveWeights sold in fabric stores with cans of tuna may be substituted is cheap, offer more options. Since the tuna packed in oil is not suitable, you are prompted to choose the weight of tuna packed in spring water.
Production
A. Construction
Disconnect the garment in various small parts and build the first part. For example, the work vest in the first place, the buildings, and deliver it to the place in which to save the other parties orconnected. Click Next on the sleeves. Their approach would be to start with the hardest part, so that it is perhaps later in my journey. It is also possible from the central part, the sentiment of the party claiming the rest. In most cases this is the section of the body.
B. Classification seams and points
This reduces the volume and allows you to make a line brittle. Decline was the clothing in many of the popular 16th and 17th centuries.
C. ClippingSeams
Concave and convex are clipping seams, is activated to their cause is not without wrinkles. Many of the seams in clothes of the period are convex or concave. Clip them that they can not move or pass, and then clipping makes the equipment fits better and makes it possible to move the seams and mold around the body as they were intended to do.
D. Press seams
Unless and until (and if) you sew by hand, it is always advisable to unlock allSeams and iron them flat. The pressing is the main difference between a sewing clothes and regular, ready-made garment. Press without bulky seams and do not seem to behave. Pressed seams have a nice finished look, she believes that the rest of the head.
E. Add Trim
Guaranteed at this stage finishes to suit hand or machine you may have to taste the cocks in taped seams, and then you can set the trim on the shell alone. Adding trimalso means that you can add trim, after all parts are sewn together and you have to do to find out what ends with the incomplete.
F. put it all together
Sew the shell and lining, after the parties and the parties Chuck shell were sewn together. This is the way of clothing is currently under construction. They would feed together, and pieces of shell and treat them as in the construction process, if you sewed byHand.
G. Fitting
Make your final assembly before reaching the post-production. Find out if your shoulders and neck holes are too small. This will end the final precision final assembly. Overall, this is your last chance to change things easily. After things are done, it is much more difficult to go back and patch up fit.
Post-Production
A. Fine Hand
It is much faster, for the operation of sewing seams finishedMachine from one side to the other side of them. What does not enter into temptation! A seam finished with his hands is unbeatable. Seems improved is flat and not disrupt the rest of the head. Prejudice or Seam fastening always looks good when handmade.
B. Finishing Strokes
Life is the garment by hand, buttons, eyelets and eyelet sewing holes and other information generated by the minute. You can easily and quickly to achieve these things with the computer, but it will not appearso well, and will not appear at the period end, which is designed to be completed.
Scanpan
